Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC 5.5kw 115/230

Description

These are built to order, please allow
UP TO 2 WEEKS
to build and test
BEFORE
shipping out from
southern California, the pandemic has caused numerous material & labor shortages. Thanks.
Hot Tub Spa Control & Heater, SmarTouch Digital Controller NEW in box, includes owners manual, warranty card from manufacturer, ACC, Applied Computer Controls, model SMTD1000. 15" 5.5kw High-Flow 2" Heater, 3.25 x 7.25" Digital Topside Display/Keypad (or optional 2.5 x 5.5" Topside Display/Keypad if you request this before you order). Rated for 230 volts 4-wire incoming power or 115 volts, it is changeable. From Spa Pumps And More
Nice large contactor in the SMTD1000 switches the 24 amp heater on-off, this is a huge advantage over all other control brands that have a tiny relay on the motherboard to do the switching.
SHIPPING IS TO LOWER 48 STATES
Default settings:
230v incoming 4-wire with neutral (NOT compatible with 3-wire no neutral power source)
230v to 2" high flow heater
115v to main 2-speed pump (can be changed to 230v)
12v to light
115v to air blower
115v to ozonator
NO CIRCULATION PUMP OUTPUT ON THIS MODEL.
Manufacturer's Specs:
Model:          Smartouch 1000
Display:          Digital Topside Keypad 3.25” x 7.25"
Heater:          High Flow 2" 15 inch 5kw
Dimensions:  14.5T x 15.4W x 3"D
Voltage:        240V 4-wire standard.  Convertible to 115V optional.
Warranty:     2 YEARS Factory Warranty by Manufacturer
Country of Manufacture:    United States
Type:               Pump, Air Blower OR second pump, and Light
Domestic Product: YES
Includes:        Power Cords, User Manual & Warranty card
Brand:              Applied Computer Controls ( ACC)
Intended Use: For portable spas, mounted under redwood skirt.
UPC:  Does not apply
-This Smartouch Digital Control comes with 15" hi-flow heater, Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. 3.25 x 7.25" topside
drops into 2.2x6.2" cutout in your spa
, see 2nd photo.
(we have a smaller topside keypad/display if you want one ask at the time of checkout, otherwise it WILL ship as listed with standard 3.25x7.25" topside. The smaller one is 2.5x5.5" and
drops into a 1.7x4.7" cutout hole
)
For 4-wire 240 volts or 3-wire 115 volts sources only.
The listed unit is NOT for 3-wire 230v; please message if you need 3-wire 230. If you order this unit you will be shipped a 4-wire control. 3-wire is less common and is built to order, takes an extra days time, just message us if you want 3-wire, and we will advise cost and lead time, please. More info at Spa Pumps And More
A power source from the house that is 4-wire has a true neutral, a ground, and 2 hots. 4-wire may be branched to provide 230v to devices as well as provide 115v to other devices, via the Neutral wire.
A European style 3-wire power source has no neutral, and only a ground wire and 2 hot wires, and can not provide 115 volts to any device therefore 3-wire systems are limited to being all 230 volts.
This is a
high flow
system for 1-1/2" or 2" pvc pipe size plumbing systems and requires a
minimum flow of 20 GPM
, it is NOT for low flow systems with 3/4" or 1" plumbing. This high flow heater can NOT be modified to work on low flow plumbing. And it does not have an output for a circ pump. Message us if you need a circ pump system and we can advise cost and lead time.
-Runs a main 2 speed spa pump, and an air blower (
or
2nd single speed pump), and spa light, and has an output for ozonator or ionizer or any other non-switched device.
-Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control. You also get quick disconnect plugs and short 'pigtail' cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using wire nuts.
-Includes 15 inch long x 2.25" diameter 5500 watt stainless steel high flow heater, can be used on 115v or 230 volts, it's changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15" heater now.
-the Smartouch SMTD 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1.4kw or 1375 watts. From the factory the SMTD1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second 1-speed pump), and the ozonator, and 12 volts to the light, which is industry-standard. You can ask us and we can change voltages for you and test prior to shipping. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2" or 2" PVC pipe size systems. Intended to be mounted under the redwood skirt of a portable spa, not out in the rain, please note.
-User's Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is.
Nice unit, replaces most any existing spa control system, and is less costly than buying a new motherboard and topside in most cases. ACC Full Factory Warranty by Applied Computer Controls Inc. Control box stands 14.6" tall, and 15.4" wide, 3" deep, heater is 15" flange to flange. Designed, built and tested in the U.S. by ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 30 years.
This goes out via ground shipping, to your street address, sorry, no P.O. Boxes. Shipping shown is to LOWER 48 STATES ONLY.
Questions? Please ask
before
you buy.
Package includes:
Smartouch Digital Control by ACC model SMTD1000
15" stainless steel flow-through heater with standard threaded couplings
Digital display keypad (topside) 3.25x7.25" with 57" long cable. (Extension cords available at extra cost, message us please.)
Pump 4 wire power cord with quick disconnect AMP plug and motor connectors. 14/4 wire size. 4-wire is Neutral, Ground, L1, L2.
Air Blower pigtail with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord.
Ozonator 7" pigtail with quick disconnect AMP plug, 18 gauge wire.
Light 7" pigtail with quick disconnect AMP plug, 18 ga wire
ACC warranty card
ACC User's Manual (can be viewed on the ACC-spas website if you care to)
additional info:
Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Warranties do not cover freight costs. Standard stuff, but just fyi, so you are aware.
PROGRAMMING GUIDE and Wiring Diagrams can also be viewed on the ACC-spas website if you are interested.
OPTIONS:
3-WIRE 230 volts incoming power - message us please, if you purchase this listing you
will
receive a standard 4-wire control. so message us if you want 3-wire and we'll respond with cost and leadtime.