Gecko Control, IN.YJ2 Heat Recovery W/ Topside - HT-1000-Y2K Replacement Option

Description

Gecko: IN.YJ2 HEAT RECOVERY CONTROLS with Pump, Pre-installed Heat Recovery Jacket & Pump Cord - Bundle (4): IN.YJ2-HR-PUMP-HR-CORD
Replacement Option For: HT-1000 & HT-2000 Series Controls
The Gecko IN.YJ2 Heat Recovery Controls are the new and improved replacement option for the HT-1000 & HT2000 series controls originally designed around our Heat Transfer/Heat Recovery Jacket. The Gecko IN.YJ2 controller can also be fitted and used on any spa with our patented pump motor Heat Transfer/Heat Recovery Jacket.
The Gecko IN.YJ2 controller can also be used as a replacement for other controls designed for our Heat Transfer/Heat Recovery System, including controls made by Balboa and TecMark (TDI)
Bundle (4): IN.YJ2-PUMP-HR-CORD
Includes:
- Control: IN.Yj2 Heat Recovery with 15' Cord with GFCI Plug - 120 Volts, 3 wires
- Topside: K-200 Digital with Temperature Readout
- Topside Adapter Plate
- Dual Heat & High Limit Sensor
- Mounting Brackets
- Light Cord with bulb socket (tub light fitting sold separately)
- Pump Cord Adapters: used with your existing pump cord
- Complete 1hp (1.5hp SPL) Pump/Motor with Pre-installed Heat Recovery Jacket
- Pump Cord
Pump & Motor Description:
Motor Description:
Mfg: Century / A.O. Smith
HP: 1 (1.5spl)
RPM: 3450
Single Speed
115 Volts
11.8 - 12 amps
HZ: 60
Frame: 56Z (48Y)
Thermally Protected
Pump Description:
Mfg: Vico/Balboa
1HP (1.5HP SPL)
1 1/2" Center Suction x Side Discharge
48 Frame
Tub water circulates through a serpentine path in the Thermal Wrap,
collecting the heat generated by the pump/motor
and recycles that heat to the tub water - were it belongs!
This patented heating system for hot tubs/spas and Whirlpool Baths, captures and recycles the waste heat "energy" produced by the pump/motor
and delivers that heat to the hot tub or bath water.  The Thermal Wrap system will heat and maintain water temperature.
The system allows the motor to run cooler; increasing the motors longevity and efficiency.
There are no moving parts and nothing to wear out.  Made in the USA!
Efficient:
- Patented design, over 1,000,000 in use
- Special thermal conductive inner heat transfer liner
- Models available for most 48 frame thru bolt spa/hot tub and jetted bathtub pump motors
Economical:
- Maintenance free - no moving parts to wear out
- Helps keep motor cooler - increases motor longevity and efficiency
- Cost less than electric heaters
- No additional electrical circuits required for installation
Safe:
- Manufactured of non-conductive materials
- Non electrical
- Self draining design (required for whirlpool bath application)
Even if you have an electric heater on your spa and the Thermal Wrap system is not your only heat source,
the Thermal Wrap System will compliment your electric heater by capturing the waste heat generated by your
pump motor and delivering that heat to the tub water, saving you money with heating costs.
The Thermal Wrap will help maintain water temperature during normal filtering and heating cycles
and while using your spa in high speed jet action.
Please visit our eBay Store for more options available for the Gecko IN.YJ2 Controls
with Heat Recovery Jacket and Pump/Motor Bundles.
Should you have any questions, please feel free to contact us.
Thank you,
Jim