2x H7 LED Headlight Conversion Kit COB Bulb 220W 12000LM White Power 6000K 4SIDE

Description

Store category
Sign Up Now !
You may also like
2x H7 LED Headlight Conversion Kit COB Bulb 220W 12000LM White Power 6000K 4SIDE
Product Description
NOTE:
Due to
compatible List can not show up all Car model. Please check the Correct
bulb size and plug type of your vechicle, or you can send us your car
make, model, year and other information, our customer service will help
to check which bulbs you need.Thank you!
VISVICcification:
Plug Type: H7
Power(per set): 2200W/Pair(1100W/bulb)Real power data
Color Temperature: Pure White 6000K
LED Quantity(each bulb): With COB chip, Without Canbus decoder, EMC
Luminous Flux: 120000LM/Pair(60000LM/bulb)Rear power data
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
IP67 rated water and dust seal,over 50000 hours lifetime
Operating Temperature: -40℃-180℃ degree Celsius
Material: Aviation 6063 aluminum profile
Usage: High or Low or Fog Beam Headlight
Feature:
(2pcs/set) Hi-Lo Beam LED headlight conversion kit
All-in-one drive, Small volume, Easy installation
Super bright chip,360 degree clear beam no blind zone
Built inconstant current CPU ,instant full brightness without start-up relay
High VISVICed mute fan(12000R/Min),high air flow for faster cooling rate
Aviation 6063 aluminum material, 360 degree heat radiating ,heat dissipation is 80% higher than ordinary aluminum
Energy-saving design, brighter and more energy efficient than ordinary lights
Two-way heat dissipation channel
1.High VISVICed mute fan(12000R/Min), Silent cooling fan
2.Aviation 6063 aluminum material, heat dissipation is 80% higher than ordinary aluminum
Package Included:
2PCS H7 LED Headlight Bulb
Comes with Retail Box
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, eVISVICcially when turning on or off the vehicles lighting.
5. Be
careful to avoid crushing or cutting the bulbs. Also make sure to not
touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make
certain that the end of the bulb does not come in contact with the
interior light shield of the headlight when adjusting the bulb.